|
|
Test methods adhesives
|
|
Home
|
|
Preparation of Adhesives
|
|
The hot melt and isocyanate terminated adhesives are prepared according to prepolymer
procedures.
|
|
For testing the hot melt adhesive is molten at 90°C
and applied to one side of the substrate. The substrate is then
reheated and the second substrate under minimal pressure. The system
is cured at 90°C for 1 hour.
|
|
Isocyanate terminated adhesives can be moisture cured or by chain extension
with a diol or diamine reactant.
|
|
Most of the test methods for the raw materials for polyurethanes and
the final products are described by ASTM
|
|
|
|
|
Adhesives ASTM Standard test methods
|
|
| Resistance of Adhesive Bonds to Chemical
Reagents |
D896-97 |
| Tensile Properties of Adhesive Bonds |
D897-95a |
| Applied Weight Per Unit Area of Dried
Adhesive Solids |
D898-96 |
| Peel or Stripping Strength of Adhesive Bonds |
D903-98 |
| Exposure of Adhesive Specimens to Artificial
Light |
D904-99 |
| Strength Properties of Adhesive Bonds in
Shear by Compression Loading |
D905-98 |
| Strength Properties of Adhesives in Plywood
Type Construction in Shear by Tension Loading |
D906-98 |
| Standard Terminology of Adhesives |
D907-99 |
| Impact Strength of Adhesive Bonds |
D950-98 |
| Apparent Shear Strength of Single-Lap-Joint
Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
D1002-99 |
| Cleavage Strength of Metal-to-Metal Adhesive
Bonds |
D1062-96e1 |
| Standard Test Methods for Viscosity of
Adhesives |
D1084-97 |
| Determining Strength Development of Adhesive
Bonds |
D1144-99 |
| Effect of Moisture and Temperature on
Adhesive Bonds |
D1151-90 |
| Resistance of Adhesives to Cyclic Laboratory
Aging Conditions |
D1183-96e1 |
| Flexural Strength of Adhesive Bonded
Laminated Assemblies |
D1184-98 |
| Storage Life of Adhesives by Consistency and
Bond Strength |
D1337-96 |
| Working Life of Liquid or Paste Adhesives by
Consistency and Bond Strength |
D1338-99 |
| Standard Specification for Adhesive for
Acoustical Materials |
D1779-98 |
| Conducting Creep Tests of Metal-to-Metal
Adhesives |
D1780-99 |
| Climbing Drum Peel for Adhesives |
D1781-98 |
| Atmospheric Exposure of Adhesive-Bonded
Joints and Structures |
D1828-96 |
| Peel Resistance of Adhesives (T-Peel Test) |
D1876-95 |
| Preparation of Surfaces of Plastics Prior to
Adhesive Bonding |
D2093-97 |
| Preparation of Bar and Rod Specimens for
Adhesion Tests |
D2094-91 |
| Tensile Strength of Adhesives by Means of Bar
and Rod Specimens |
D2095-96e1 |
| Creep Properties of Adhesives in Shear by
Compression Loading (Metal-to-Metal) |
D2293-96 |
| Creep Properties of Adhesives in Shear by
Tension Loading (Metal-to-Metal) |
D2294-96 |
| Strength Properties of Adhesives in Shear by
Tension Loading at Elevated Temperatures (Metal-to-Metal) |
D2295-96 |
| Standard Guide for Preparation of Metal
Surfaces for Adhesive Bonding |
D2651-90 |
| Durability Assessment of Adhesive Joints
Stressed in Peel |
D2918-99 |
| Determining Durability of Adhesive Joints
Stressed in Shear by Tension Loading |
D2919-95 |
| Flexibility Determination of Hot-Melt
Adhesives by Mandrel Bend Test Method |
D3111-99 |
| Determining Strength of Adhesively Bonded
Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
D3163-96 |
| Strength Properties of Adhesively Bonded
Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Metric) |
D3164M-98 |
| Strength Properties of Adhesively Bonded
Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
D3164-97 |
| Strength Properties of Adhesives in Shear by
Tension Loading of Single-Lap-Joint Laminated Assemblies |
D3165-95 |
| Fatigue Properties of Adhesives in Shear by
Tension Loading (Metal/Metal) |
D3166-99 |
| Floating Roller Peel Resistance of Adhesives |
D3167-97 |
|
|
|
|
|
Last edited on:
|
November 20, 2006
|
Copyright®, Design, Layout and Technical Content by:
|
|
|
|